Gravity Sensor Shake Control System e cig GT-S kit

Gravity Sensor Shake Control System e cig GT-S kit
Gravity Sensor Shake Control System e cig GT-S kit
Product Code: 902
Availability: 15
Price: 81,32 € 59,14 €
Qty:     - OR -   Add to Wish List
Add to Compare

GT-S Gravity Sensor Variable Voltage and Variable Wattage Mod kit.

GT-S kit content:

  •     1 piece GT-S battery tube;
  •     1 piece 18650 battery (2200mAh);
  •     1 piece usb charge (mobile charger);
  •     1 piece wall charger (US);
  •     1 piece manual in english;
  •     1 piece gift box.


Advantages:

  •     OLED screen that shows resistance of the atomizer, number of puffs, power, working voltage/wattage, battery capacity;
  •     variable voltage: 3-6V;
  •     variable wattage: 3-15 W;
  •     can charge mobile phone;
  •     can change menu, adjust voltage and wattage by shaking the Mod.



Features:

  •     Variable Voltage: can be adjusted from 3.0V-6.0V volts at the rate of 0.1 volt increments.
  •     Variable Wattage: the power can be adjusted from the range 3.0W to 15.0W at the rate of 0.5 watts increments.
  •     510 and eGo threaded, compatible with many popular atomizers (Thread fits CE4, CE5, eGo, T2, T3, MT3, VIVI NOVA, 510, etc).
  •     Short Circuit Protection.
  •     Reverse Battery Protection Circuit.
  •     Battery Voltage Detection.
  •     Resistive Load Detection ( Ohms meter ).
  •     ON/OFF battery switch.
  •     OLED Battery Power Display.
  •     Telescopic Tube supports 18350, 18650, 18490 or 18500 batteries.
  •     Remembers last set voltage or wattage when switching batteries.
  •     Gravity Sensor Shake Control.
Instructions to use:
 
 1.Turn on/ off:
Turn on: Press the button 5 times continuous, when it is in standby mode(Mod vibration).
Turn off: Press the button 5 times continuous again.
 
2.Set the mode:
Keep pressing the button and shaking the GT-S 3-5 times when power on(Mod vibration).
 
3.Exit the mode:
Shake the GT-S 3-5 times quickly while keeping it in a horizontality level, can turn to standby mode(Mod vibration).
 
4.Adjust Voltage:
In the setting mode, press the button till the screen displays “VOLT”, then to adjust the voltage by leaning the GT-S left or right.
Lean to Left to reduce, and to right to increase.
Lean it to one side for long time, the increase and decrease rate can speed up. (Mod vibration)
 
5.Adjust Wattage:
In the setting mode, press the button till the screen displays “WATT”, then to adjust the wattage by leaning the GT-S left or right.
Lean to Left to reduce, and to right to increase.
Lean it to one side for long time, the increase and decrease rate can speed up. (Mod vibration)
 
6.LED Screen display:
In the setting mode, press the button till the screen displays “SHOW”
Lean to Left to “SHOW OFF”- the OLED screen is turned off
Lean to right to “SHOW ON”- the OLED screen is turned on
 
7.Mobile Charge:
 
In the setting mode, press the button till the screen displays “MOBILE”
Lean to Left to “MOBILE OFF”
Lean to right to “MOBILE ON”(Mod vibration). 

 


English review of the GT-S Mod:

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: