Kit Lavatube L-Rider 4.0 aka EpicStorm / Lambo

Kit Lavatube L-Rider 4.0 aka EpicStorm / Lambo
Kit Lavatube L-Rider 4.0 aka EpicStorm / Lambo
Brand: L-Rider
Product Code: 201
Availability: 47
Price: 71,43 € 48,70 €
Qty:     - OR -   Add to Wish List
Add to Compare


Has the ability to check atomizer resistance;

Package EpicStorm 4.0  Lambo contains:

  • Lavatube 4.0 (Body) 1 pc

  • 1800mah 18650 batteries 2 pc

  • 510 atomizer 1 pc

  • Stainless steel drip tip 1 pc

  • Charger 1 pc

  • Ego case 1 pc
  • Instructions manual (in english)

Connection: 510 and ego (no adapter needed)


The Lambo V4 kit is the forth revision of the original and much beloved lavatub mod. This Advanced Personal Vaporizer (APV) and is the best value on the variable volt market today.


How Check the value of the atomizer`s resistance :
- press Shortly and simultaneously the Power button and one of the buttons "+" or "-" for 5 times and the display will show the value of atomizer`s resistance  mounted on Lavatube 4.0.



  • Has the ability to check atomizer resistance;

  • Variable voltage from 3.0-6.0V in increments of .1

  • ego 510 connection. Fits all510,CE4,ego,etc atomizers ;

  • It can take low resistance atomizer's from: 1.0-5.0ohms;

  • Has the ability to check the battery voltage;

  • L-rider Technology Original design

  • The newly designed battery can support and maximum 9amps out put current.


Technical Specifics

  • Output voltage 3.0-6.0v

  • Short circuit protected current <20mA

  • Quiescent current <100uA

  • 4amp output rating


Safety system


  • Super low quiescent current protection

  • Reverse battery protection

  • Over-current protection

  • Short circuit/atomizer protection

  • Warning against low voltage

  • Vent hole for gas discharge


A chrome Lambo EpicStorm Body:
Voltage adjustable - adjust the tension after your taste - from 3V to 6V, in steps of 0.1v
LCD display - used to display the current voltage setting and optional battery charge status.
Connector 510 to support ego - gives you access to most cartomizoarelor and atomizers provider of your choice.
Output current regulator - maintains the same voltage, regardless of how much battery power is. As the battery is consumed, the device will maintain constant voltage giving you a consistent experience for vaping until it is time to put a new battery (charged).
Accidental overheating protection - If the activation is held down for more than 10 seconds, the machine will stop supplying power until the button is released. This will avoid the inconvenience if you accidentally activate the device in your pocket. We recommend that you close the unit by pressing the Power (On / Off) before putting in your pocket.
Short circuit protection - the unit can detect cartomizer / spray / atomizer that has a resistance that is too small for current voltage setting (because it will attract more will generate too many amps and watts). When this occurs, voltage will be reset to 3.7 volts to protect all components (and you). If the unit detects that cartomizer / atomizer is shorted then it turns off power of the device.
Reverse battery protection - this will help protect both you and the device when the battery is installed incorrectly.

Battery Monitoring / Protection from over-discharge - the device will monitor the battery voltage and turns off automatically when battery voltage reaches a level of about 3.3 volts. This will keep you from over-discharge batteries, which will shorten their life and possibly damage them.
Counter battery voltage - voltage lavatube has a timer built in, simply press the red power button 7 times and display the battery voltage for a few seconds. This way you can monitor remaining battery power before it will need to be recharged .The LCD display will blink when the battery needs recharging and will turn the power off.
Current Protection - The unit is designed to monitor the current and close automatically when detects any excess current conditions (less than 2.5 amps).
Ventilation hole - located at the bottom of the unit - all lithium-ion potential for "unpredictable" behavior . Vents is an extra margin of safety if something happens with the battery installed.

How to operate :

1. Press and hold Power button for 5 second for On/Off function

2. Decreasing the voltage ("-" button) : Press this button to decrease the voltage by 0.1 volt
increments on the digital display,  once the voltage display  reaches 3.0 volt the 
display will cycle back to 6.0 volts . 
3. Increasing the voltage ("+" button) : Press this button to increase the voltage by 0.1 volt 
increments on the digital display,  once the voltage display reaches 6.0 volt the 
display will cycle back to 3.0 volts .
4. The Fire button : Once the on fuction has been enabled , you can use this button to
power the fitted atomizer .

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Customers who bought this product also bought the following products: