L-Rider Transformer Lavatube Kit - Bonus 30ml e liquid

L-Rider Transformer Lavatube Kit - Bonus 30ml e liquid
L-Rider Transformer Lavatube Kit - Bonus 30ml e liquid
Brand: L-Rider
Product Code: 678
Availability: 10
Price: 73,32 € 58,81 €
Qty:     - OR -   Add to Wish List
Add to Compare

L-Rider Transformer Lavatube Kit - Bonus 30ml e liquid.

Has the ability to check atomizer resistance;
Package L-Rider Transformer contains:
Lavatube Transformer body 1 pc
1800mah 18650 batteries 2 pc
CE5 No Wick clearomizer 2 pc
2 Slots Charger 1 pc
Ego case 1 pc
Instructions manual (in english)
Bonus 30 ml elichid
 
 
Connection: 510 and ego (no adapter needed)
Body diamensions:
Length: 136 mm(unscrewed, with 18650 battery)/ 107 mm (screwed, with 18350 battery)
Diameter: 22 mm.
 
Features:
Has the ability to check atomizer resistance;
Variable voltage from 3.0-6.0V in increments of .1
ego/510 connection. Fits all 510,CE4,ego,etc atomizers ;
It can take low resistance atomizer's from: 1.0-5.0 ohms;
L-rider Technology Original design
Air Valve
Telescope
 
 
Technical Specifics:
Output voltage 3.0-6.0v
Short circuit protected current <20mA
Quiescent current <100uA
4amp output rating
 
 
Safety system:
Super low quiescent current protection
10 seconds safety cut-off current
Reverse battery protection
Over-current protection
Short circuit/atomizer protection
Warning against low voltage
Air Valve to icrease/decrease the air flow
  
 
Features:
Telescope: Screw it anticlockwise to adjust a proper room for 18650, 18490 or 18350 protected/unprotected batteries.
Press the Power (Red) Button for 5 times in 3 seconds and the LCD will display the battery voltage.
Air Valve: Screw the air valve clock wise, less air will come into the atomizer when you enhale. Screw it anticlockwise and more air will run into the atomizer.
Voltage adjustable - adjust the tension after your taste - from 3V to 6V, in steps of 0.1v
LCD display - used to display the current voltage setting.
Connector 510 to support ego - gives you access to most cartomizers and atomizers provider of your choice.
Output current regulator - maintains the same voltage, regardless of how much battery power is. As the battery is consumed, the device will maintain constant voltage giving you a consistent experience for vaping until it is time to put a new battery (charged).
Accidental overheating protection - If the activation is held down for more than 10 seconds, the machine will stop supplying power until the button is released. This will avoid the inconvenience if you accidentally activate the device in your pocket. We recommend that you close the unit by pressing the Power (On / Off) before putting in your pocket.
Short circuit protection - the unit can detect cartomizer / spray / atomizer that has a resistance that is too small for current voltage setting (because it will attract more will generate too many amps and watts). When this occurs, voltage will be reset to 3.7 volts to protect all components (and you). If the unit detects that cartomizer / atomizer is shorted then it turns off power of the device.
Reverse battery protection - this will help protect both you and the device when the battery is installed incorrectly.
 
Battery Monitoring / Protection from over-discharge - the device will monitor the battery voltage and turns off automatically when battery voltage reaches a level of about 3.3 volts. This will keep you from over-discharge batteries, which will shorten their life and possibly damage them.
Counter battery voltage - voltage lavatube has a timer built in, simply press the red power button 7 times and display the battery voltage for a few seconds. This way you can monitor remaining battery power before it will need to be recharged .The LCD display will blink when the battery needs recharging and will turn the power off.
Current Protection - The unit is designed to monitor the current and close automatically when detects any excess current conditions (less than 2.5 amps).
 
How to operate :
1. Press and hold Power button for 5 second for On/Off function
2. Decreasing the voltage ("-" button) : Press this button to decrease the voltage by 0.1 volt increments on the digital display,  once the voltage display  reaches 3.0 volt the  display will cycle back to 6.0 volts . 
3. Increasing the voltage ("+" button) : Press this button to increase the voltage by 0.1 volt  increments on the digital display,  once the voltage display reaches 6.0 volt the  display will cycle back to 3.0 volts .
4. The Fire button : Once the on fuction has been enabled , you can use this button to power the fitted atomizer .

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: